AGP -PRO Bus Extenders .... Bus Isolation and Wearout extenders ....

Picture of AGP-PRO IXAGPROIX is a Bus Isolation Extender that allows user to test the AGP-PRO (Accelerated Graphics Port) add-on boards quickly, without having to power the system down each time. It is especially designed to save valuable labor and time in the production environment. It is also a great tool for engineers, during product development, where changes and testing are required. In addition, it protects the motherboard from being damaged by bad AGP boards. It has many outstanding features such as, local or external power and signal isolation controls and fused power lines with short circuit sensing, etc. It also allows for voltage margin and current measurement. The extender connector on top, features a universal AGP-PRO connector. The dimension is 8.3" L x 1.95" H. AGPROIX Specification AGPROIX user's manual


Picture of AGPPRO-01AGPPRO-01 is a straight AGP-PRO extender designed as a wearout extender to prolong the life of the AGP-PRO connector, in a heavily used environment. It can also be used to prevent the I/O board's gold fingers from damage, when I/O boards are used to test the motherboards repeatedly. The extender connector on top, features a universal AGP-PRO connector. The dimension is 4.632" L x 2.327" H.


Picture of AGPPRO-11AGPPRO-11 is a straight AGP-PRO extender of different shape, designed as a wearout extender to prolong the life of the AGP-PRO connector, in a heavily used environment. It can also be used to prevent the I/O board's gold fingers from damage, when I/O boards are used to test the motherboards repeatedly. The extender connector on top, features a universal AGP-PRO connector. The dimension is 4.994" L x 1.965" H.


Picture of AGPPROTX-01AGP-PROTX-1 is a right angle AGP-PRO extender designed for the 1U/2U chassis. The connector is mounted on the B-side of the extender. The extender connector features a universal AGP-PRO connector. The overall dimension is 4.6" L x 1.15" H.. The connector center height is 0.95".


Picture of AGPROSX4AGPROSX4 is a very short AGP-PRO wearout extender, designed to be on top of the AGPROIX extender as a wearout unit. It is used to prolong the life of the AGP-PRO connector, in a heavily used environment. It has mounting holes that matches that of the AGPROIX extender, so they can be hold together by plastic mounting ears. The extender connector on top, features a universal AGP-PRO connector. The dimension is 5.076" L x 1.1" H. There are two versions, -2 for 2 layer PCB and -4 for the 4 layer PCB.


Picture of AGP2PROXAGP2PROX is a short AGP TO AGP-PRO adapter. It allows the AGP-PRO board to be tested in a standard AGP slot. The adapter avoids misalignment of the gold fingers between the two standards. The extender connector on top, features a universal AGP-PRO connector. However, user need to specify 1.5VDD or 3.3VDD gold finger cut on the AGP side. The default is 3.3VDD. The dimension is 4.33" L x 1.1" H.


Picture of PRO2AGPXPRO2AGPX is a short AGP-PRO TO AGP adapter. It allows the AGP board to be tested in a AGP-PRO slot. The adapter avoids misalignment of the gold fingers between the two standards. The extender connector on top, features a AGP connector. User need to specify 1.5VDD or 3.3VDD connector on the AGP side. The default is 3.3VDD. The gold finger features universal AGP-PRO cut. The dimension is 5.076" L x 1.1" H.

Picture of PCIAGPTX01-8U8PCIAGPTX01 is a PCI/AGP-PRO/PCI, 3 in 1 right angle riser. The overall dimension of the main board assembly is 2.95"H x 7.00"W. The middle AGP-PRO connector is connected directly to the AGP-PRO gold fingers. The top connector is connected to the bottom connector. However, there are some dedicated signals that are borrowed from a small paddle board which is plugged into an adjacent slot. The bottom connector is a completely independent connection, coming from a separate paddle board of another PCI slot on the motherboard. The user can order the riser with PCI-32 bit or PCI 64 bit connectors and AGP or AGP-PRO connector. All connectors are mounted on the B side of the riser card. This riser is designed to plug into an AGP or an AGP-PRO slot on the motherboard. The high performance kapton cable is 3" long and it supports higher PCI bus speed. Picture shown below is the PCIAGPTX01 populated with 2 PCI-64 bit 3.3V connectors, and a AGP-PRO universal connector. The top PCI connector is located at 2.571", the center AGP connector is located at 1.771", and the bottom PCI connector is located at 0.971" from the bottom of the board..








A Time and Labor Cost Saver.........Order Now, and Speed Your Products to Market !


[Home] [Sales] [Support] [News] [Product] [FAQ]

(C) Copyright 1998, Adex Electronics, Inc. 3 Watson, Irvine, CA 92618, USA. (T) 949-597-1772; (F) 949-597-1729
Email: adex@adexelec.com; Website: http://www.adexelec.com