Other Riser Cards

These riser cards are valuable tools in the test and production field. They help protect the gold fingers of the add-on board from wear out due to repeated insertion cycles. They can also be utilized on the motherboard to enable the user to test the add-on boards frequently without causing damage to the connector on the motherboard. These risers are also a good solution for raising our bus isolation extender to the user's desired height.

AMR-02 - Audio Modem Riser Extender Card, Rev-02.Dimension - H: 2.31" x W: 1.81"AMR-02 EXTENDER PICTURE

CNR01 - CNR extender, REV-01. Dimension - H: 2.47" x W: 1.93"CNR01 EXTENDER PICTURE

CNRSX - CNR wearout extender. Dimension - H: 1.30" x W: 2.45"CNR WEAROUT EXTENDER PICTURE

CNRIX - CNRIX is a CNR Bus Isolation Extender that allows user to test the CNR add-on boards quickly without having to power the system down each time. It is especially designed to save valuable labor and time in production testing environment. It is also a great tool for engineers during product development while many changes and testing are required. It provides total power and signal isolation between the motherboard and the board under test. It can be controlled manually by an on-board toggle switch or by external TTL signals through PC's parallel port. Besides saving time for testing, it also protects the motherboard from damages. The CNRIX is designed with many years of field experience and real user-suggested features. It is built with quality and state of the art components. Dimension - H: 4.55" x W: 6.83"CNRIX PICTURE

CRIMM-02- Continuity RIMM module, Rev-02, designed to be latched by the RIMM socket.
Dimension - H: 25.4mm x W: 133.35mmCRIMM-02 RISER PICTURE

CRIMM-03- Continuity RIMM module, Rev-03, designed NOT to be latched by the RIMM socket.
Dimension - H: 25.4mm x W: 123.35mmCRIMM-03 RISER PICTURE

DIMM-01- DIMM Riser Card, Rev-01, designed to be latched by the DIMM socket. Dimension - H: 1.21" x W: 5.26" (NOT including socket ears). It is being replaced by the DIMM133-01-L below.
DIMM-01 RISER PICTURE


DIMM-02- DIMM Riser Card, Rev-02, designed NOT to be latched by the DIMM socket. Dimension - H: 1.21" x W: 4.86" (NOT including socket ears). It is being replaced by the DIMM133-01-U-S below.DIMM-02 RISER PICTURE


DIMMSO2- straight DIMM extender, 2-layer board, one-to-one connection. Designed NOT to be latched by the DIMM socket. Dimension - H: 1.21" x W: 4.86" (NOT including socket ears).DIMMSO2 RISER PICTURE


DIMM100-D- 100 pin DIMM Riser Card, designed NOT to be latched by the DIMM socket. Dimension - H: 1.00" x W: 3.55" (NOT including socket ears).DIMM100D RISER PICTURE



DIMM133-01- - 168 pin DIMM riser Card. Three versions are available, -L for latchable, -UA for unlatchable with angle cut, -US for unlatchable with straight cut. It allows memory operation up to 133MHz. Dimension - H: 0.78" x W: 5.25" (NOT including the socket ears).
DIMM133 RISER PICTUREDIMM133 RISER PICTUREDIMM133 RISER PICTURE


DDRDIMM-01- - 184 pin, 2.5V DDRDIMM riser Card. Three versions are available, -L for latchable, -UA for unlatchable with angle cut, -US for unlatchable with straight cut. Dimension - H: 0.78" x W: 5.25" (NOT including socket ears).

DDRDIMM RISER PICTUREDDRDIMM RISER PICTUREDDRDIMM RISER PICTURE


DDR2-INT- - 240 pin, 1.8V, DDR2 Riser Card with angle cut, designed NOT to be latched by the DDR2 socket. Current Sensing Resistor option (-CSR) is available. Dimension - H: 0.57" x W: 5.25" (NOT including socket ears).DDR2-INT RISER PICTURE


DDR2-02 - 240 pin, 1.8V, DDR2 Riser Card. Three versions are available, -L for latchable, -UA for unlatchable with angle cut, -US for unlatchable with straight cut. Dimension - H: 1.04" x W: 5.56" (NOT including socket ears).
DDR2-02L RISER PICTUREDDR2-02UA RISER PICTUREDDR2-02US RISER PICTURE

DDR3 - 240 pin, 1.5V, DDR3 Riser Card. Three versions are available, -L for latchable, -A for unlatchable with angle cut, -U for unlatchable with straight cut. Current Sensing Resistor option (-CSR) is available to all three versions. Dimension - H: 0.740" x W: 5.25" (NOT including socket ears).
DDR3 L RISER PICTUREDDR3 A RISER PICTUREDDR3 U RISER PICTURE


DDR4 - 284 pin, 1.2V, DDR4 Riser Card. Three versions are available, -L for latchable, -A for unlatchable with angle cut, -S for unlatchable with straight cut. Current Sensing Resistor option (-CSR) is available to all three versions. CSRs are placed on VDD and VPP, typical value is 5 milliohm, 1/2W, 1% Dimension - H: 0.740" x W: 5.25" (NOT including socket ears).
DDR4 L RISER PICTUREDDR4 A RISER PICTUREDDR4 S RISER PICTURE



DDR4-2 - 288 pin, 1.2V, DDR4 Riser Card. Three versions are available, -L for latchable, -A for unlatchable with angle cut, -S for unlatchable with straight cut. Current Sensing Resistor option (-CSR) is available to all three versions. CSRs are placed on VDD and VPP, typical value is 5 milliohm, 1/2W, 1% Dimension - H: 0.740" x W: 5.25" (NOT including socket ears).
DDR4 L RISER PICTUREDDR4 A RISER PICTUREDDR4 S RISER PICTURE



FBD-01 - 240 pin Full Buffered DIMM riser Card. Three versions are available, -L for latchable, -UA for unlatchable with angle cut, -US for unlatchable with straight cut. Current Sensing Resistor option (-CSR) is available to all versions. Dimension - H: 1.04" x W: 5.56" (NOT including socket ears).FBD-01-L RISER PICTUREFBD-01-UA RISER PICTUREFBD-01-US RISER PICTURE


RIMMS-01- RIMM Saver Card, Rev-01, designed to be latched by the RIMM socket.
Dimension - H: 1.27" x W: 5.27"RIMMS-01 RISER PICTURE

RIMMP-01- RIMM Interposer Card, Rev-01, designed NOT to be latched by the RIMM socket.
Dimension - H: 1.27" x W: 5.27"RIMMP-01 RISER PICTURE

SLOT1-02 - SLOT1 Riser Card (for Pentium II processor), Rev-02, board thickness 50mil. Dimension -H: 1.97" x W: 5.43"

SLOT1-02 RISER PICTURE

SLOT1-11 - SLOT1 Riser Card (for Pentium II processor), Rev-11, board thickness 55 mil, with modified gold fingers (Replaces previous SLOT1 Rev-03). Dimension -H: 1.97" x W: 5.43" Picture of SLOT1-11

SLOT1R-02 - SLOT1 Right Angle Riser Card (for Pentium II processor), Rev-02. Dimension - H: 3.1" x W: 5.5 SLOT1R-02 RISER PICTURE

SLOT1-S01 - SLOT1 straight riser card, 2 layer. Dimension - H: 1.97" x W: 5.43" SLOT1-S02 RISER PICTURE

SLOT2-03 - SLOT2 Riser Card (for Xeon processor) with modified palladium fingers for longer lasting insertion cycles. It is a multilayer PCB, designed for testing of the processor modules. Rev-03.
Dimension - H: 2.13" x W: 5.99" SLOT2 -03 RISER PICTURE

SLOT2-04 - SLOT2 Riser Card (for Xeon processor) with modified palladium fingers for longer lasting insertion cycles. The riser is a 2-layer PCB, designed for continuity testing only.
Dimension - H: 1.38" x W: 5.99" SLOT2 -04 RISER PICTURE


SODIMM-01 - Straight in-line SODIMM extender.
Dimension - H: 2.28" x W: 2.75" SODIMM RISER PICTURE


SODIMMRL-STD -Bend back SODIMM extender for standard SODIMM socket.
Dimension - H: 1.2" x W: 2.75" SODIMMRL STANDARD RISER PICTURE


SODIMMRL-REV - Bend back SODIMM extender for reverse SODIMM socket.
Dimension - H: 1.2" x W: 2.75" SODIMMRL REVERSE RISER PICTURE


DDR2-SODIMM-01 - DDR2-SODIMM extender, 200 pin, 1.8V. A Current Sensing Resistor option is available with a -CSR suffix to the base P/N.Dimension - H: 2" x W: 2.8" DDR2-SODIMM RISER PICTURE


DDR2-SODIMM-SB - DDR2 Bend back SODIMM extender for standard SODIMM socket.
DDR2-SODIMM-RB - DDR2 Bend back SODIMM extender for reverse SODIMM socket.
Dimension - H: 1.26" x W: 2.77" DDR2 SODIMM BEND BACK


DDR3-SODIMM-01 - DDR3-SODIMM extender, 204 pin, 1.5V. A Current Sensing Resistor option is available with a -CSR suffix to the base P/N.Dimension - H: 2" x W: 2.8" DDR3-SODIMM RISER PICTURE


DDR4-SOD-V1 - DDR4-SODIMM, 260 pin, 1.2V, vertical extender. A Current Sensing Resistor option is available with a -CSR suffix to the base P/N.Dimension - H: 1.175" x W: 3.358" (29.85mm X 85.3mm) DDR4-SOD-V RISER  PICTURE


DDR4-SOD-STD - DDR4-SODIMM, 260 pin, 1.2V, straight standard extender. A Current Sensing Resistor option is available with a -CSR suffix to the base P/N.Dimension - H: 1.3" x W: 3" (33mm X 76.2mm) DDR4-SOD-STD RISER  PICTURE


DDR4-SOD-RVS - DDR4-SODIMM, 260 pin, 1.2V, straight reverse extender. A Current Sensing Resistor option is available with a -CSR suffix to the base P/N.Dimension - H: 1.3" x W: 3" (33mm X 76.2mm) DDR4-SOD-RVS RISER  PICTURE


[Home] [Sales] [Support] [News] [Product] [FAQ]

(C) Copyright 1998, Adex Electronics, Inc. 3 Watson, Irvine, CA 92618, USA. (T) 949-597-1772; (F) 949-597-1729
Email: adex@adexelec.com; Website: http://www.adexelec.com