Adex Electronics, ISAIX16-E,
Revision: E
Bill Of Materials, Page 1 of 1,
Last Update: 3/25/98
Item | Qty | Reference | Part | Mfg. | ||||||||
1 | 2 | R2,R1 | 33 | |||||||||
2 | 6 | C6,C7,C10,C38,C39,C40 | +10UF, 16V, SMD, both sides | |||||||||
3 | 1 | Q2 | TO220AB | Siliconix | ||||||||
4 | 2 | R3,R11 | 8.2K | |||||||||
5 | 1 | SW1 | SW SPDT | |||||||||
6 | 4 | R21,R22,R40,R41 | 2K | |||||||||
7 | 5 | R16,R18,R36,R38,R46 | 15K | |||||||||
* 8 | 3 | R12,R13,R14 | 4.7K | |||||||||
* 9 | 5 | R17,R19,R24,R26, R47 | 300 or 560 | |||||||||
* 10 | 3 | C3,C11,Z14 | +.68UF or +1.0uf | |||||||||
11 | 2 | C1,C2 | +16UF, 20V, SMD, SOLDER SIDE | |||||||||
*11A | 1 | R34 | 12K | |||||||||
*11B | 1 | R32 | 10K | |||||||||
12 | 5 | D4,D2,D5,D6 | GREEN LED | |||||||||
12A | 1 | D1 | RED BLINKING LED | |||||||||
13 | 3 | T1,T2,T5 | TVS5 | |||||||||
14 | 2 | T3,T4 | TVS12 | |||||||||
15 | 3 | R4,R27,R28 | 240 | |||||||||
15A | 1 | R25 | 220, 1% (2200) | |||||||||
16 | 3 | R37,R39,R43 | 110, 5% (110) | |||||||||
16A | 1 | R15 | 110, 1% (1100) | |||||||||
17 | 1 | Q4 | SI9400DY or SI9435DY or IR7205 | Siliconix or IR | ||||||||
18 | 1 | Q5 | SI9955DY or IR7103 | Siliconix or IR | ||||||||
19 | 2 | R30,R31 | 820 | |||||||||
20 | 16 | C32,Z12,Z13,,Z15,Z30,Z1-Z6, Z7-Z11 | .1UF | |||||||||
21 | 1 | W7 | HEADER 5X2 | |||||||||
22 | 1 | C12 | 180PF | |||||||||
24 | 4 | W1 | 4 amp Pluggable Fuse with sockets | |||||||||
25 | 3 | W2,W3,W4 | 1.6 amp Pluggable Fuse with sockets | |||||||||
25 | 1 | U17 | COMPARATOR () | Proprietary | ||||||||
27 | 1 | U12 | 16V8-15, dip20, IX1_7A | Lattice | ||||||||
27A | 1 | U15 | 16V8-25, dip20, IX2_3 | Lattice | ||||||||
28 | 1 | U13 | ANALOG SWITCH | Proprietary | ||||||||
* 29 | 5 | R23,R20,R9,R33,R45 | 22K | |||||||||
34 | 11 | U1,U2,U3,U4,U5,U6,U7,U8, U9,U10,U11 | QS3245SO | Quality Semi or Pericom | ||||||||
35 | 1 | JP2 | HEADER 18X2 | |||||||||
36 | 1 | JP1 | HEADER 31X2 | |||||||||
41 | 1 | CR1 | DIODE, 1N4148 | |||||||||
42 | 1 | RP1 | 2K POT, SINGLE TURN | |||||||||
43 | 1 | BZ1 | BUZZER | |||||||||
44 | 1 | W6 | JUMPER | |||||||||
45 | 1 | U16 | 74HC14 | |||||||||
46 | 1 | R10 | 1.5K | |||||||||
* 47 | 4 | C8,C33,C35,R42 | .01UF | |||||||||
48 | 1 | R35 | 56K | |||||||||
* 49 | 1 | C9 | +0.1uf (SMD 104) | |||||||||
50 | 1 | - | ISA Extender Connector (Black) | |||||||||
51 | 1 | - | G35 Mounting Bracket | |||||||||
52 | 1 | - | ISAIX16-E PCB |
Note:
1. Do not install U14, R5, R6, R7, R8, C4, C5, C36,
C37, R51-R61.
2. Add a +1.0uf cap on top of R20 with - polarity toward ground.
3. Add a +1.0uf cap on top of R23 with + polarity toward ground.
4. Cut trace to U12.7
5. Cut Trace to U12.11
6. Add wire from U17.1 to U17.13 (via)
7. Add wire from U15.3 to U15.8
8. Add wire from U12.11 to U15.13 (via near Z15)
9. Add wire from U12.4 to U16.6 (via)
10. Add 1.5K between U15.1 to U15.20
* Parts and procedures are changed after the initial release of the board.
[Back] [Home] [Sales] [Support] [News] [Product] [FAQ]
(C) Copyright 1998, Adex Electronics,
Inc. 3 Watson, Irvine, CA 92618, USA. (T) 949-597-1772; (F) 949-597-1729
Email: adex@adexelec.com; Website:
http://www.adexelec.com